1:72 VII-C Brass Upgrade Kits


Kits will ship within two weeks of placing an order, with the first shipments due June 29th. Shipping and handling in the USA/CAN is $6 and outside the USA is $10. Packages ship by Global Priority Mail and should arrive in 5-7 days.

TELEPHONE NUMBERS required for exports.

 

This is ONLY for USA/CAN.
OTHERS CLICK HERE

The buttons below are for different quantities of the same kit.
If you want more than five at one time, you can email us.

1 Piece, Revell 1:72 PE Brass Upgrade Kit
US$40

2 Pieces, Revell 1:72 PE Brass Upgrade Kit
US$70

 

3 Pieces, Revell 1:72 PE Brass Upgrade Kit
US$100

5 Pieces, Revell 1:72 PE Brass Upgrade Kit
US$155

 

Included:
Deck
CT Floor
Flood Patterns for around Planes, Fore and Aft
8 Handwheels for Guns/Sail Hatch
Saddle Tank Top Vents, 10 Large, 4 Small
Periscope Fluting/Rings
Circle and Cross for CT Sides
Same Symbols for CT 'Nose'
Intake Screens for CT, Both Types

You would probably do better to get a little piece of fine brass screen to do the CT intakes. It's available as a smoking accessory for pipes and is inexpensive.

In a few weeks there will be a second kit which will have all the flooding holes' patterns. There are so many different patterns that I am going to make a kit that has all of them. You, the modeller, can fill in the holes not used on your particular boat. This means the kit will not 'be' any particular boat, but will suffice for many different ones. Documentation will be provided so you can basically look up your boat, (or pick one from the list) and proceed. It is our intention to make the limber hole plates with rivets already in place, but it remains to be seen if this is feasible or not.

Thanks,

Jason Overhulser
Modelbrass